Thick copper PCBs

Thick copper PCBs, manufactured in genuine etching technology, are the first choice in case of high currents and characterised by structures with copper thicknesses from 105 to 400 µm.

Graphic of a thick copper PCB

Your advantages

  • High currents and heat dissipation in the circuit board
  • Targeted partial increase in cross-section for high-current paths
  • Reduction of space requirements for high-current conductor systems
  • From sample to series production from a single source
  • Power and control electronics on a single board
  • PCB production and processing with standard materials and series processes
  • Cost optimisation of the final product

We are happy to support your thick copper project at every step along the way. 
Contact our expert team here.

Inquiry

This PCB classic is the first choice when high currents are unavoidable: the thick copper PCB, manufactured in genuine etching technology. Thick copper PCBs are characterised by structures with copper thicknesses from 105 to 400 µm. These PCBs are used for large (high) current outputs and for optimisation of the thermal management. The thick copper allows large PCB-cross-sections for high current loads and encourages heat dissipation. The most common designs are multilayer or double-sided. With this PCB technology it is also possible to combine fine layout structures on the outer layers and thick copper layers in the inner layers.

MaterialsFR4 (thermostable)
Number of layers2-8
PCB thickness0.5 mm - 3.2 mm
Final copper outer layers50, 70, 105, 175, 210 µm
Final copper inner layers70, 105, 210, 400 µm
Conductor structuresDepending on final copper according to design compass
Minimum drilling diametermin. ⅔ of the total copper thickness
Aspect ratio≤ 1:6
SurfacesSee general technical specifications, No HAL

The values specified represent the maximum range of services and may be restricted in certain combinations.

  • Chemical nickel/gold
  • Chemical tin
  • Electroplated nickel/gold
  • OSP
  • others on request

Solder resist masks 

  • Photosensitive coating systems, thermal final curing
  • Colours: green, red, blue, glossy black, matt black, white, yellow
  • Non-photosensitive coating systems, purely thermosetting: white, black

Additional printing 

  • Identification/assembly
  • Hole filler/through hole filler
  • Peelable solder mask 
  • Heatsink
  • Carbon

Edge plating 

The end faces of the PCB contour can be plated in order to improve the EMC protection of a PCB, make electrical contact with the housing of the module or meet increased cleanliness requirements. 

Edge plating

Milled plated through holes 

It is possible to produce application-specific components with so-called milled plated through holes. Due to the possibility of contact on the front side, the resulting PCBs can be soldered as components to another board (interposer).

Milled plated through holes.

Contour machining

Contour production: milling and scoring

  • Use filled thermostable base materials with low Z-axis expansion 
  • Calculate resin filling level (material-dependent pre-calculation using layer stack-up at KSG)
  • Use sufficient resin-rich prepregs
  • Avoid "stacked" copper surfaces and copper-free areas across all layers of the layer stack up
  • Evenly distribute copper surfaces and copper-free areas 
  • Fill large copper-free areas with copper
  • Generate sufficiently large residual rings
 

Calculate your high current tracks with our calculator Pfeil Icon

   

Digital Design Compass

The smart platform for fast and reliable PCB development.

  • 2 plants. 1 platform. Available 24/7.
  • Design rules for all technologies
  • Practical examples and design-to-cost tips

We’ve combined all the parameters for you in our Design Compass. 

Register free of charge

A safe track to be smarter together

Take advantage of the direct line to the experienced PCB experts in our Technical Support. We are happy to support you in every phase of your project.

two people shake hands
Submit             inquiry

Talk to us in the early stages of development and contact our team of experts. Together we will find the solution that makes your product even better.

Submit an inquiry

a group of people at a workshop
Workshop &    Online Consulting

With a workshop at our company or at your office, we give you the opportunity to discuss the crucial technical aspects and features of your project in detail.

Request workshop

Johann Hackel in customer dialogue
Co- Engineering & Support

From design & layout checks to various calculations and thermal analysis - the experienced, competent Technical Support team will be happy to help you.

To the services

When extremely high currents are required

Power and control electronics on a single board

Targeted partial increase in cross-section for high-current paths

Close-up of a thick copper PCB